diff --git a/src/Doc/Prog_Prove/Logic.thy b/src/Doc/Prog_Prove/Logic.thy
--- a/src/Doc/Prog_Prove/Logic.thy
+++ b/src/Doc/Prog_Prove/Logic.thy
@@ -1,878 +1,878 @@
 (*<*)
 theory Logic
 imports LaTeXsugar
 begin
 (*>*)
 text\<open>
 \vspace{-5ex}
 \section{Formulas}
 
 The core syntax of formulas (\textit{form} below)
 provides the standard logical constructs, in decreasing order of precedence:
 \[
 \begin{array}{rcl}
 
 \mathit{form} & ::= &
   \<open>(form)\<close> ~\mid~
   \<^const>\<open>True\<close> ~\mid~
   \<^const>\<open>False\<close> ~\mid~
   \<^prop>\<open>term = term\<close>\\
  &\mid& \<^prop>\<open>\<not> form\<close>\index{$HOL4@\isasymnot} ~\mid~
   \<^prop>\<open>form \<and> form\<close>\index{$HOL0@\isasymand} ~\mid~
   \<^prop>\<open>form \<or> form\<close>\index{$HOL1@\isasymor} ~\mid~
   \<^prop>\<open>form \<longrightarrow> form\<close>\index{$HOL2@\isasymlongrightarrow}\\
  &\mid& \<^prop>\<open>\<forall>x. form\<close>\index{$HOL6@\isasymforall} ~\mid~  \<^prop>\<open>\<exists>x. form\<close>\index{$HOL7@\isasymexists}
 \end{array}
 \]
 Terms are the ones we have seen all along, built from constants, variables,
 function application and \<open>\<lambda>\<close>-abstraction, including all the syntactic
 sugar like infix symbols, \<open>if\<close>, \<open>case\<close>, etc.
 \begin{warn}
 Remember that formulas are simply terms of type \<open>bool\<close>. Hence
 \<open>=\<close> also works for formulas. Beware that \<open>=\<close> has a higher
 precedence than the other logical operators. Hence \<^prop>\<open>s = t \<and> A\<close> means
 \<open>(s = t) \<and> A\<close>, and \<^prop>\<open>A\<and>B = B\<and>A\<close> means \<open>A \<and> (B = B) \<and> A\<close>.
 Logical equivalence can also be written with
 \<open>\<longleftrightarrow>\<close> instead of \<open>=\<close>, where \<open>\<longleftrightarrow>\<close> has the same low
 precedence as \<open>\<longrightarrow>\<close>. Hence \<open>A \<and> B \<longleftrightarrow> B \<and> A\<close> really means
 \<open>(A \<and> B) \<longleftrightarrow> (B \<and> A)\<close>.
 \end{warn}
 \begin{warn}
 Quantifiers need to be enclosed in parentheses if they are nested within
 other constructs (just like \<open>if\<close>, \<open>case\<close> and \<open>let\<close>).
 \end{warn}
 The most frequent logical symbols and their ASCII representations are shown
 in Fig.~\ref{fig:log-symbols}.
 \begin{figure}
 \begin{center}
 \begin{tabular}{l@ {\qquad}l@ {\qquad}l}
 \<open>\<forall>\<close> & \xsymbol{forall} & \texttt{ALL}\\
 \<open>\<exists>\<close> & \xsymbol{exists} & \texttt{EX}\\
 \<open>\<lambda>\<close> & \xsymbol{lambda} & \texttt{\%}\\
-\<open>\<longrightarrow>\<close> & \texttt{-{}->}\\
+\<open>\<longrightarrow>\<close> & \texttt{-{\kern0pt}->}\\
 \<open>\<longleftrightarrow>\<close> & \texttt{<->}\\
 \<open>\<and>\<close> & \texttt{/\char`\\} & \texttt{\&}\\
 \<open>\<or>\<close> & \texttt{\char`\\/} & \texttt{|}\\
 \<open>\<not>\<close> & \xsymbol{not} & \texttt{\char`~}\\
 \<open>\<noteq>\<close> & \xsymbol{noteq} & \texttt{\char`~=}
 \end{tabular}
 \end{center}
 \caption{Logical symbols and their ASCII forms}
 \label{fig:log-symbols}
 \end{figure}
 The first column shows the symbols, the other columns ASCII representations.
 The \texttt{\char`\\}\texttt{<...>} form is always converted into the symbolic form
 by the Isabelle interfaces, the treatment of the other ASCII forms
 depends on the interface. The ASCII forms \texttt{/\char`\\} and
 \texttt{\char`\\/}
 are special in that they are merely keyboard shortcuts for the interface and
 not logical symbols by themselves.
 \begin{warn}
 The implication \<open>\<Longrightarrow>\<close> is part of the Isabelle framework. It structures
 theorems and proof states, separating assumptions from conclusions.
 The implication \<open>\<longrightarrow>\<close> is part of the logic HOL and can occur inside the
 formulas that make up the assumptions and conclusion.
 Theorems should be of the form \<open>\<lbrakk> A\<^sub>1; \<dots>; A\<^sub>n \<rbrakk> \<Longrightarrow> A\<close>,
 not \<open>A\<^sub>1 \<and> \<dots> \<and> A\<^sub>n \<longrightarrow> A\<close>. Both are logically equivalent
 but the first one works better when using the theorem in further proofs.
 \end{warn}
 
 \section{Sets}
 \label{sec:Sets}
 
 Sets of elements of type \<^typ>\<open>'a\<close> have type \<^typ>\<open>'a set\<close>\index{set@\<open>set\<close>}.
 They can be finite or infinite. Sets come with the usual notation:
 \begin{itemize}
 \item \indexed{\<^term>\<open>{}\<close>}{$IMP042},\quad \<open>{e\<^sub>1,\<dots>,e\<^sub>n}\<close>
 \item \<^prop>\<open>e \<in> A\<close>\index{$HOLSet0@\isasymin},\quad \<^prop>\<open>A \<subseteq> B\<close>\index{$HOLSet2@\isasymsubseteq}
 \item \<^term>\<open>A \<union> B\<close>\index{$HOLSet4@\isasymunion},\quad \<^term>\<open>A \<inter> B\<close>\index{$HOLSet5@\isasyminter},\quad \<^term>\<open>A - B\<close>,\quad \<^term>\<open>-A\<close>
 \end{itemize}
 (where \<^term>\<open>A-B\<close> and \<open>-A\<close> are set difference and complement)
 and much more. \<^const>\<open>UNIV\<close> is the set of all elements of some type.
 Set comprehension\index{set comprehension} is written
 \<^term>\<open>{x. P}\<close>\index{$IMP042@\<^term>\<open>{x. P}\<close>} rather than \<open>{x | P}\<close>.
 \begin{warn}
 In \<^term>\<open>{x. P}\<close> the \<open>x\<close> must be a variable. Set comprehension
 involving a proper term \<open>t\<close> must be written
 \noquotes{@{term[source] "{t | x y. P}"}}\index{$IMP042@\<open>{t |x. P}\<close>},
 where \<open>x y\<close> are those free variables in \<open>t\<close>
 that occur in \<open>P\<close>.
 This is just a shorthand for \<^term>\<open>{v. \<exists>x y. v = t \<and> P}\<close>, where
 \<open>v\<close> is a new variable. For example, \<^term>\<open>{x+y|x. x \<in> A}\<close>
 is short for \noquotes{@{term[source]"{v. \<exists>x. v = x+y \<and> x \<in> A}"}}.
 \end{warn}
 
 Here are the ASCII representations of the mathematical symbols:
 \begin{center}
 \begin{tabular}{l@ {\quad}l@ {\quad}l}
 \<open>\<in>\<close> & \texttt{\char`\\\char`\<in>} & \texttt{:}\\
 \<open>\<subseteq>\<close> & \texttt{\char`\\\char`\<subseteq>} & \texttt{<=}\\
 \<open>\<union>\<close> & \texttt{\char`\\\char`\<union>} & \texttt{Un}\\
 \<open>\<inter>\<close> & \texttt{\char`\\\char`\<inter>} & \texttt{Int}
 \end{tabular}
 \end{center}
 Sets also allow bounded quantifications \<^prop>\<open>\<forall>x \<in> A. P\<close> and
 \<^prop>\<open>\<exists>x \<in> A. P\<close>.
 
 For the more ambitious, there are also \<open>\<Union>\<close>\index{$HOLSet6@\isasymUnion}
 and \<open>\<Inter>\<close>\index{$HOLSet7@\isasymInter}:
 \begin{center}
 @{thm Union_eq} \qquad @{thm Inter_eq}
 \end{center}
 The ASCII forms of \<open>\<Union>\<close> are \texttt{\char`\\\char`\<Union>} and \texttt{Union},
 those of \<open>\<Inter>\<close> are \texttt{\char`\\\char`\<Inter>} and \texttt{Inter}.
 There are also indexed unions and intersections:
 \begin{center}
 @{thm[eta_contract=false] UNION_eq} \\ @{thm[eta_contract=false] INTER_eq}
 \end{center}
 The ASCII forms are \ \texttt{UN x:A.~B} \ and \ \texttt{INT x:A. B} \
 where \texttt{x} may occur in \texttt{B}.
 If \texttt{A} is \texttt{UNIV} you can write \ \texttt{UN x.~B} \ and \ \texttt{INT x. B}.
 
 Some other frequently useful functions on sets are the following:
 \begin{center}
 \begin{tabular}{l@ {\quad}l}
 @{const_typ set}\index{set@\<^const>\<open>set\<close>} & converts a list to the set of its elements\\
 @{const_typ finite}\index{finite@\<^const>\<open>finite\<close>} & is true iff its argument is finite\\
 \noquotes{@{term[source] "card :: 'a set \<Rightarrow> nat"}}\index{card@\<^const>\<open>card\<close>} & is the cardinality of a finite set\\
  & and is \<open>0\<close> for all infinite sets\\
 @{thm image_def}\index{$IMP042@\<^term>\<open>f ` A\<close>} & is the image of a function over a set
 \end{tabular}
 \end{center}
 See @{cite "Nipkow-Main"} for the wealth of further predefined functions in theory
 \<^theory>\<open>Main\<close>.
 
 
 \subsection*{Exercises}
 
 \exercise
 Start from the data type of binary trees defined earlier:
 \<close>
 
 datatype 'a tree = Tip | Node "'a tree" 'a "'a tree"
 
 text\<open>
 Define a function \<open>set ::\<close> \<^typ>\<open>'a tree \<Rightarrow> 'a set\<close>
 that returns the elements in a tree and a function
 \<open>ord ::\<close> \<^typ>\<open>int tree \<Rightarrow> bool\<close>
 that tests if an \<^typ>\<open>int tree\<close> is ordered.
 
 Define a function \<open>ins\<close> that inserts an element into an ordered \<^typ>\<open>int tree\<close>
 while maintaining the order of the tree. If the element is already in the tree, the
 same tree should be returned. Prove correctness of \<open>ins\<close>:
 \<^prop>\<open>set(ins x t) = {x} \<union> set t\<close> and \<^prop>\<open>ord t \<Longrightarrow> ord(ins i t)\<close>.
 \endexercise
 
 
 \section{Proof Automation}
 
 So far we have only seen \<open>simp\<close> and \indexed{\<open>auto\<close>}{auto}: Both perform
 rewriting, both can also prove linear arithmetic facts (no multiplication),
 and \<open>auto\<close> is also able to prove simple logical or set-theoretic goals:
 \<close>
 
 lemma "\<forall>x. \<exists>y. x = y"
 by auto
 
 lemma "A \<subseteq> B \<inter> C \<Longrightarrow> A \<subseteq> B \<union> C"
 by auto
 
 text\<open>where
 \begin{quote}
 \isacom{by} \textit{proof-method}
 \end{quote}
 is short for
 \begin{quote}
 \isacom{apply} \textit{proof-method}\\
 \isacom{done}
 \end{quote}
 The key characteristics of both \<open>simp\<close> and \<open>auto\<close> are
 \begin{itemize}
 \item They show you where they got stuck, giving you an idea how to continue.
 \item They perform the obvious steps but are highly incomplete.
 \end{itemize}
 A proof method is \conceptnoidx{complete} if it can prove all true formulas.
 There is no complete proof method for HOL, not even in theory.
 Hence all our proof methods only differ in how incomplete they are.
 
 A proof method that is still incomplete but tries harder than \<open>auto\<close> is
 \indexed{\<open>fastforce\<close>}{fastforce}.  It either succeeds or fails, it acts on the first
 subgoal only, and it can be modified like \<open>auto\<close>, e.g.,
 with \<open>simp add\<close>. Here is a typical example of what \<open>fastforce\<close>
 can do:
 \<close>
 
 lemma "\<lbrakk> \<forall>xs \<in> A. \<exists>ys. xs = ys @ ys;  us \<in> A \<rbrakk>
    \<Longrightarrow> \<exists>n. length us = n+n"
 by fastforce
 
 text\<open>This lemma is out of reach for \<open>auto\<close> because of the
 quantifiers.  Even \<open>fastforce\<close> fails when the quantifier structure
 becomes more complicated. In a few cases, its slow version \<open>force\<close>
 succeeds where \<open>fastforce\<close> fails.
 
 The method of choice for complex logical goals is \indexed{\<open>blast\<close>}{blast}. In the
 following example, \<open>T\<close> and \<open>A\<close> are two binary predicates. It
 is shown that if \<open>T\<close> is total, \<open>A\<close> is antisymmetric and \<open>T\<close> is
 a subset of \<open>A\<close>, then \<open>A\<close> is a subset of \<open>T\<close>:
 \<close>
 
 lemma
   "\<lbrakk> \<forall>x y. T x y \<or> T y x;
      \<forall>x y. A x y \<and> A y x \<longrightarrow> x = y;
      \<forall>x y. T x y \<longrightarrow> A x y \<rbrakk>
    \<Longrightarrow> \<forall>x y. A x y \<longrightarrow> T x y"
 by blast
 
 text\<open>
 We leave it to the reader to figure out why this lemma is true.
 Method \<open>blast\<close>
 \begin{itemize}
 \item is (in principle) a complete proof procedure for first-order formulas,
   a fragment of HOL. In practice there is a search bound.
 \item does no rewriting and knows very little about equality.
 \item covers logic, sets and relations.
 \item either succeeds or fails.
 \end{itemize}
 Because of its strength in logic and sets and its weakness in equality reasoning, it complements the earlier proof methods.
 
 
 \subsection{\concept{Sledgehammer}}
 
 Command \isacom{sledgehammer} calls a number of external automatic
 theorem provers (ATPs) that run for up to 30 seconds searching for a
 proof. Some of these ATPs are part of the Isabelle installation, others are
 queried over the internet. If successful, a proof command is generated and can
 be inserted into your proof.  The biggest win of \isacom{sledgehammer} is
 that it will take into account the whole lemma library and you do not need to
 feed in any lemma explicitly. For example,\<close>
 
 lemma "\<lbrakk> xs @ ys = ys @ xs;  length xs = length ys \<rbrakk> \<Longrightarrow> xs = ys"
 
 txt\<open>cannot be solved by any of the standard proof methods, but
 \isacom{sledgehammer} finds the following proof:\<close>
 
 by (metis append_eq_conv_conj)
 
 text\<open>We do not explain how the proof was found but what this command
 means. For a start, Isabelle does not trust external tools (and in particular
 not the translations from Isabelle's logic to those tools!)
 and insists on a proof that it can check. This is what \indexed{\<open>metis\<close>}{metis} does.
 It is given a list of lemmas and tries to find a proof using just those lemmas
 (and pure logic). In contrast to using \<open>simp\<close> and friends who know a lot of
 lemmas already, using \<open>metis\<close> manually is tedious because one has
 to find all the relevant lemmas first. But that is precisely what
 \isacom{sledgehammer} does for us.
 In this case lemma @{thm[source]append_eq_conv_conj} alone suffices:
 @{thm[display] append_eq_conv_conj}
 We leave it to the reader to figure out why this lemma suffices to prove
 the above lemma, even without any knowledge of what the functions \<^const>\<open>take\<close>
 and \<^const>\<open>drop\<close> do. Keep in mind that the variables in the two lemmas
 are independent of each other, despite the same names, and that you can
 substitute arbitrary values for the free variables in a lemma.
 
 Just as for the other proof methods we have seen, there is no guarantee that
 \isacom{sledgehammer} will find a proof if it exists. Nor is
 \isacom{sledgehammer} superior to the other proof methods.  They are
 incomparable. Therefore it is recommended to apply \<open>simp\<close> or \<open>auto\<close> before invoking \isacom{sledgehammer} on what is left.
 
 \subsection{Arithmetic}
 
 By arithmetic formulas we mean formulas involving variables, numbers, \<open>+\<close>, \<open>-\<close>, \<open>=\<close>, \<open><\<close>, \<open>\<le>\<close> and the usual logical
 connectives \<open>\<not>\<close>, \<open>\<and>\<close>, \<open>\<or>\<close>, \<open>\<longrightarrow>\<close>,
 \<open>\<longleftrightarrow>\<close>. Strictly speaking, this is known as \concept{linear arithmetic}
 because it does not involve multiplication, although multiplication with
 numbers, e.g., \<open>2*n\<close>, is allowed. Such formulas can be proved by
 \indexed{\<open>arith\<close>}{arith}:
 \<close>
 
 lemma "\<lbrakk> (a::nat) \<le> x + b; 2*x < c \<rbrakk> \<Longrightarrow> 2*a + 1 \<le> 2*b + c"
 by arith
 
 text\<open>In fact, \<open>auto\<close> and \<open>simp\<close> can prove many linear
 arithmetic formulas already, like the one above, by calling a weak but fast
 version of \<open>arith\<close>. Hence it is usually not necessary to invoke
 \<open>arith\<close> explicitly.
 
 The above example involves natural numbers, but integers (type \<^typ>\<open>int\<close>)
 and real numbers (type \<open>real\<close>) are supported as well. As are a number
 of further operators like \<^const>\<open>min\<close> and \<^const>\<open>max\<close>. On \<^typ>\<open>nat\<close> and
 \<^typ>\<open>int\<close>, \<open>arith\<close> can even prove theorems with quantifiers in them,
 but we will not enlarge on that here.
 
 
 \subsection{Trying Them All}
 
 If you want to try all of the above automatic proof methods you simply type
 \begin{isabelle}
 \isacom{try}
 \end{isabelle}
 There is also a lightweight variant \isacom{try0} that does not call
 sledgehammer. If desired, specific simplification and introduction rules
 can be added:
 \begin{isabelle}
 \isacom{try0} \<open>simp: \<dots> intro: \<dots>\<close>
 \end{isabelle}
 
 \section{Single Step Proofs}
 
 Although automation is nice, it often fails, at least initially, and you need
 to find out why. When \<open>fastforce\<close> or \<open>blast\<close> simply fail, you have
 no clue why. At this point, the stepwise
 application of proof rules may be necessary. For example, if \<open>blast\<close>
 fails on \<^prop>\<open>A \<and> B\<close>, you want to attack the two
 conjuncts \<open>A\<close> and \<open>B\<close> separately. This can
 be achieved by applying \emph{conjunction introduction}
 \[ @{thm[mode=Rule,show_question_marks]conjI}\ \<open>conjI\<close>
 \]
 to the proof state. We will now examine the details of this process.
 
 \subsection{Instantiating Unknowns}
 
 We had briefly mentioned earlier that after proving some theorem,
 Isabelle replaces all free variables \<open>x\<close> by so called \conceptidx{unknowns}{unknown}
 \<open>?x\<close>. We can see this clearly in rule @{thm[source] conjI}.
 These unknowns can later be instantiated explicitly or implicitly:
 \begin{itemize}
 \item By hand, using \indexed{\<open>of\<close>}{of}.
 The expression \<open>conjI[of "a=b" "False"]\<close>
 instantiates the unknowns in @{thm[source] conjI} from left to right with the
 two formulas \<open>a=b\<close> and \<open>False\<close>, yielding the rule
 @{thm[display,mode=Rule,margin=100]conjI[of "a=b" False]}
 
 In general, \<open>th[of string\<^sub>1 \<dots> string\<^sub>n]\<close> instantiates
 the unknowns in the theorem \<open>th\<close> from left to right with the terms
 \<open>string\<^sub>1\<close> to \<open>string\<^sub>n\<close>.
 
 \item By unification. \conceptidx{Unification}{unification} is the process of making two
 terms syntactically equal by suitable instantiations of unknowns. For example,
 unifying \<open>?P \<and> ?Q\<close> with \mbox{\<^prop>\<open>a=b \<and> False\<close>} instantiates
 \<open>?P\<close> with \<^prop>\<open>a=b\<close> and \<open>?Q\<close> with \<^prop>\<open>False\<close>.
 \end{itemize}
 We need not instantiate all unknowns. If we want to skip a particular one we
 can write \<open>_\<close> instead, for example \<open>conjI[of _ "False"]\<close>.
 Unknowns can also be instantiated by name using \indexed{\<open>where\<close>}{where}, for example
 \<open>conjI[where ?P = "a=b"\<close> \isacom{and} \<open>?Q = "False"]\<close>.
 
 
 \subsection{Rule Application}
 
 \conceptidx{Rule application}{rule application} means applying a rule backwards to a proof state.
 For example, applying rule @{thm[source]conjI} to a proof state
 \begin{quote}
 \<open>1.  \<dots>  \<Longrightarrow> A \<and> B\<close>
 \end{quote}
 results in two subgoals, one for each premise of @{thm[source]conjI}:
 \begin{quote}
 \<open>1.  \<dots>  \<Longrightarrow> A\<close>\\
 \<open>2.  \<dots>  \<Longrightarrow> B\<close>
 \end{quote}
 In general, the application of a rule \<open>\<lbrakk> A\<^sub>1; \<dots>; A\<^sub>n \<rbrakk> \<Longrightarrow> A\<close>
 to a subgoal \mbox{\<open>\<dots> \<Longrightarrow> C\<close>} proceeds in two steps:
 \begin{enumerate}
 \item
 Unify \<open>A\<close> and \<open>C\<close>, thus instantiating the unknowns in the rule.
 \item
 Replace the subgoal \<open>C\<close> with \<open>n\<close> new subgoals \<open>A\<^sub>1\<close> to \<open>A\<^sub>n\<close>.
 \end{enumerate}
 This is the command to apply rule \<open>xyz\<close>:
 \begin{quote}
 \isacom{apply}\<open>(rule xyz)\<close>\index{rule@\<open>rule\<close>}
 \end{quote}
 This is also called \concept{backchaining} with rule \<open>xyz\<close>.
 
 \subsection{Introduction Rules}
 
 Conjunction introduction (@{thm[source] conjI}) is one example of a whole
 class of rules known as \conceptidx{introduction rules}{introduction rule}. They explain under which
 premises some logical construct can be introduced. Here are some further
 useful introduction rules:
 \[
 \inferrule*[right=\mbox{\<open>impI\<close>}]{\mbox{\<open>?P \<Longrightarrow> ?Q\<close>}}{\mbox{\<open>?P \<longrightarrow> ?Q\<close>}}
 \qquad
 \inferrule*[right=\mbox{\<open>allI\<close>}]{\mbox{\<open>\<And>x. ?P x\<close>}}{\mbox{\<open>\<forall>x. ?P x\<close>}}
 \]
 \[
 \inferrule*[right=\mbox{\<open>iffI\<close>}]{\mbox{\<open>?P \<Longrightarrow> ?Q\<close>} \\ \mbox{\<open>?Q \<Longrightarrow> ?P\<close>}}
   {\mbox{\<open>?P = ?Q\<close>}}
 \]
 These rules are part of the logical system of \concept{natural deduction}
 (e.g., @{cite HuthRyan}). Although we intentionally de-emphasize the basic rules
 of logic in favour of automatic proof methods that allow you to take bigger
 steps, these rules are helpful in locating where and why automation fails.
 When applied backwards, these rules decompose the goal:
 \begin{itemize}
 \item @{thm[source] conjI} and @{thm[source]iffI} split the goal into two subgoals,
 \item @{thm[source] impI} moves the left-hand side of a HOL implication into the list of assumptions,
 \item and @{thm[source] allI} removes a \<open>\<forall>\<close> by turning the quantified variable into a fixed local variable of the subgoal.
 \end{itemize}
 Isabelle knows about these and a number of other introduction rules.
 The command
 \begin{quote}
 \isacom{apply} \<open>rule\<close>\index{rule@\<open>rule\<close>}
 \end{quote}
 automatically selects the appropriate rule for the current subgoal.
 
 You can also turn your own theorems into introduction rules by giving them
 the \indexed{\<open>intro\<close>}{intro} attribute, analogous to the \<open>simp\<close> attribute.  In
 that case \<open>blast\<close>, \<open>fastforce\<close> and (to a limited extent) \<open>auto\<close> will automatically backchain with those theorems. The \<open>intro\<close>
 attribute should be used with care because it increases the search space and
 can lead to nontermination.  Sometimes it is better to use it only in
 specific calls of \<open>blast\<close> and friends. For example,
 @{thm[source] le_trans}, transitivity of \<open>\<le>\<close> on type \<^typ>\<open>nat\<close>,
 is not an introduction rule by default because of the disastrous effect
 on the search space, but can be useful in specific situations:
 \<close>
 
 lemma "\<lbrakk> (a::nat) \<le> b; b \<le> c; c \<le> d; d \<le> e \<rbrakk> \<Longrightarrow> a \<le> e"
 by(blast intro: le_trans)
 
 text\<open>
 Of course this is just an example and could be proved by \<open>arith\<close>, too.
 
 \subsection{Forward Proof}
 \label{sec:forward-proof}
 
 Forward proof means deriving new theorems from old theorems. We have already
 seen a very simple form of forward proof: the \<open>of\<close> operator for
 instantiating unknowns in a theorem. The big brother of \<open>of\<close> is
 \indexed{\<open>OF\<close>}{OF} for applying one theorem to others. Given a theorem \<^prop>\<open>A \<Longrightarrow> B\<close> called
 \<open>r\<close> and a theorem \<open>A'\<close> called \<open>r'\<close>, the theorem \<open>r[OF r']\<close> is the result of applying \<open>r\<close> to \<open>r'\<close>, where \<open>r\<close> should be viewed as a function taking a theorem \<open>A\<close> and returning
 \<open>B\<close>.  More precisely, \<open>A\<close> and \<open>A'\<close> are unified, thus
 instantiating the unknowns in \<open>B\<close>, and the result is the instantiated
 \<open>B\<close>. Of course, unification may also fail.
 \begin{warn}
 Application of rules to other rules operates in the forward direction: from
 the premises to the conclusion of the rule; application of rules to proof
 states operates in the backward direction, from the conclusion to the
 premises.
 \end{warn}
 
 In general \<open>r\<close> can be of the form \<open>\<lbrakk> A\<^sub>1; \<dots>; A\<^sub>n \<rbrakk> \<Longrightarrow> A\<close>
 and there can be multiple argument theorems \<open>r\<^sub>1\<close> to \<open>r\<^sub>m\<close>
 (with \<open>m \<le> n\<close>), in which case \<open>r[OF r\<^sub>1 \<dots> r\<^sub>m]\<close> is obtained
 by unifying and thus proving \<open>A\<^sub>i\<close> with \<open>r\<^sub>i\<close>, \<open>i = 1\<dots>m\<close>.
 Here is an example, where @{thm[source]refl} is the theorem
 @{thm[show_question_marks] refl}:
 \<close>
 
 thm conjI[OF refl[of "a"] refl[of "b"]]
 
 text\<open>yields the theorem @{thm conjI[OF refl[of "a"] refl[of "b"]]}.
 The command \isacom{thm} merely displays the result.
 
 Forward reasoning also makes sense in connection with proof states.
 Therefore \<open>blast\<close>, \<open>fastforce\<close> and \<open>auto\<close> support a modifier
 \<open>dest\<close> which instructs the proof method to use certain rules in a
 forward fashion. If \<open>r\<close> is of the form \mbox{\<open>A \<Longrightarrow> B\<close>}, the modifier
 \mbox{\<open>dest: r\<close>}\index{dest@\<open>dest:\<close>}
 allows proof search to reason forward with \<open>r\<close>, i.e.,
 to replace an assumption \<open>A'\<close>, where \<open>A'\<close> unifies with \<open>A\<close>,
 with the correspondingly instantiated \<open>B\<close>. For example, @{thm[source,show_question_marks] Suc_leD} is the theorem \mbox{@{thm Suc_leD}}, which works well for forward reasoning:
 \<close>
 
 lemma "Suc(Suc(Suc a)) \<le> b \<Longrightarrow> a \<le> b"
 by(blast dest: Suc_leD)
 
 text\<open>In this particular example we could have backchained with
 @{thm[source] Suc_leD}, too, but because the premise is more complicated than the conclusion this can easily lead to nontermination.
 
 %\subsection{Finding Theorems}
 %
 %Command \isacom{find{\isacharunderscorekeyword}theorems} searches for specific theorems in the current
 %theory. Search criteria include pattern matching on terms and on names.
 %For details see the Isabelle/Isar Reference Manual~@{cite IsarRef}.
 %\bigskip
 
 \begin{warn}
 To ease readability we will drop the question marks
 in front of unknowns from now on.
 \end{warn}
 
 
 \section{Inductive Definitions}
 \label{sec:inductive-defs}\index{inductive definition|(}
 
 Inductive definitions are the third important definition facility, after
 datatypes and recursive function.
 \ifsem
 In fact, they are the key construct in the
 definition of operational semantics in the second part of the book.
 \fi
 
 \subsection{An Example: Even Numbers}
 \label{sec:Logic:even}
 
 Here is a simple example of an inductively defined predicate:
 \begin{itemize}
 \item 0 is even
 \item If $n$ is even, so is $n+2$.
 \end{itemize}
 The operative word ``inductive'' means that these are the only even numbers.
 In Isabelle we give the two rules the names \<open>ev0\<close> and \<open>evSS\<close>
 and write
 \<close>
 
 inductive ev :: "nat \<Rightarrow> bool" where
 ev0:    "ev 0" |
 evSS:  (*<*)"ev n \<Longrightarrow> ev (Suc(Suc n))"(*>*)
 text_raw\<open>@{prop[source]"ev n \<Longrightarrow> ev (n + 2)"}\<close>
 
 text\<open>To get used to inductive definitions, we will first prove a few
 properties of \<^const>\<open>ev\<close> informally before we descend to the Isabelle level.
 
 How do we prove that some number is even, e.g., \<^prop>\<open>ev 4\<close>? Simply by combining the defining rules for \<^const>\<open>ev\<close>:
 \begin{quote}
 \<open>ev 0 \<Longrightarrow> ev (0 + 2) \<Longrightarrow> ev((0 + 2) + 2) = ev 4\<close>
 \end{quote}
 
 \subsubsection{Rule Induction}\index{rule induction|(}
 
 Showing that all even numbers have some property is more complicated.  For
 example, let us prove that the inductive definition of even numbers agrees
 with the following recursive one:\<close>
 
 fun evn :: "nat \<Rightarrow> bool" where
 "evn 0 = True" |
 "evn (Suc 0) = False" |
 "evn (Suc(Suc n)) = evn n"
 
 text\<open>We prove \<^prop>\<open>ev m \<Longrightarrow> evn m\<close>.  That is, we
 assume \<^prop>\<open>ev m\<close> and by induction on the form of its derivation
 prove \<^prop>\<open>evn m\<close>. There are two cases corresponding to the two rules
 for \<^const>\<open>ev\<close>:
 \begin{description}
 \item[Case @{thm[source]ev0}:]
  \<^prop>\<open>ev m\<close> was derived by rule \<^prop>\<open>ev 0\<close>: \\
  \<open>\<Longrightarrow>\<close> \<^prop>\<open>m=(0::nat)\<close> \<open>\<Longrightarrow>\<close> \<open>evn m = evn 0 = True\<close>
 \item[Case @{thm[source]evSS}:]
  \<^prop>\<open>ev m\<close> was derived by rule \<^prop>\<open>ev n \<Longrightarrow> ev(n+2)\<close>: \\
 \<open>\<Longrightarrow>\<close> \<^prop>\<open>m=n+(2::nat)\<close> and by induction hypothesis \<^prop>\<open>evn n\<close>\\
 \<open>\<Longrightarrow>\<close> \<open>evn m = evn(n + 2) = evn n = True\<close>
 \end{description}
 
 What we have just seen is a special case of \concept{rule induction}.
 Rule induction applies to propositions of this form
 \begin{quote}
 \<^prop>\<open>ev n \<Longrightarrow> P n\<close>
 \end{quote}
 That is, we want to prove a property \<^prop>\<open>P n\<close>
 for all even \<open>n\<close>. But if we assume \<^prop>\<open>ev n\<close>, then there must be
 some derivation of this assumption using the two defining rules for
 \<^const>\<open>ev\<close>. That is, we must prove
 \begin{description}
 \item[Case @{thm[source]ev0}:] \<^prop>\<open>P(0::nat)\<close>
 \item[Case @{thm[source]evSS}:] \<^prop>\<open>\<lbrakk> ev n; P n \<rbrakk> \<Longrightarrow> P(n + 2::nat)\<close>
 \end{description}
 The corresponding rule is called @{thm[source] ev.induct} and looks like this:
 \[
 \inferrule{
 \mbox{@{thm (prem 1) ev.induct[of "n"]}}\\
 \mbox{@{thm (prem 2) ev.induct}}\\
 \mbox{\<^prop>\<open>!!n. \<lbrakk> ev n; P n \<rbrakk> \<Longrightarrow> P(n+2)\<close>}}
 {\mbox{@{thm (concl) ev.induct[of "n"]}}}
 \]
 The first premise \<^prop>\<open>ev n\<close> enforces that this rule can only be applied
 in situations where we know that \<open>n\<close> is even.
 
 Note that in the induction step we may not just assume \<^prop>\<open>P n\<close> but also
 \mbox{\<^prop>\<open>ev n\<close>}, which is simply the premise of rule @{thm[source]
 evSS}.  Here is an example where the local assumption \<^prop>\<open>ev n\<close> comes in
 handy: we prove \<^prop>\<open>ev m \<Longrightarrow> ev(m - 2)\<close> by induction on \<^prop>\<open>ev m\<close>.
 Case @{thm[source]ev0} requires us to prove \<^prop>\<open>ev(0 - 2)\<close>, which follows
 from \<^prop>\<open>ev 0\<close> because \<^prop>\<open>0 - 2 = (0::nat)\<close> on type \<^typ>\<open>nat\<close>. In
 case @{thm[source]evSS} we have \mbox{\<^prop>\<open>m = n+(2::nat)\<close>} and may assume
 \<^prop>\<open>ev n\<close>, which implies \<^prop>\<open>ev (m - 2)\<close> because \<open>m - 2 = (n +
 2) - 2 = n\<close>. We did not need the induction hypothesis at all for this proof (it
 is just a case analysis of which rule was used) but having \<^prop>\<open>ev n\<close>
 at our disposal in case @{thm[source]evSS} was essential.
 This case analysis of rules is also called ``rule inversion''
 and is discussed in more detail in \autoref{ch:Isar}.
 
 \subsubsection{In Isabelle}
 
 Let us now recast the above informal proofs in Isabelle. For a start,
 we use \<^const>\<open>Suc\<close> terms instead of numerals in rule @{thm[source]evSS}:
 @{thm[display] evSS}
 This avoids the difficulty of unifying \<open>n+2\<close> with some numeral,
 which is not automatic.
 
 The simplest way to prove \<^prop>\<open>ev(Suc(Suc(Suc(Suc 0))))\<close> is in a forward
 direction: \<open>evSS[OF evSS[OF ev0]]\<close> yields the theorem @{thm evSS[OF
 evSS[OF ev0]]}. Alternatively, you can also prove it as a lemma in backwards
 fashion. Although this is more verbose, it allows us to demonstrate how each
 rule application changes the proof state:\<close>
 
 lemma "ev(Suc(Suc(Suc(Suc 0))))"
 txt\<open>
 @{subgoals[display,indent=0,goals_limit=1]}
 \<close>
 apply(rule evSS)
 txt\<open>
 @{subgoals[display,indent=0,goals_limit=1]}
 \<close>
 apply(rule evSS)
 txt\<open>
 @{subgoals[display,indent=0,goals_limit=1]}
 \<close>
 apply(rule ev0)
 done
 
 text\<open>\indent
 Rule induction is applied by giving the induction rule explicitly via the
 \<open>rule:\<close> modifier:\index{inductionrule@\<open>induction ... rule:\<close>}\<close>
 
 lemma "ev m \<Longrightarrow> evn m"
 apply(induction rule: ev.induct)
 by(simp_all)
 
 text\<open>Both cases are automatic. Note that if there are multiple assumptions
 of the form \<^prop>\<open>ev t\<close>, method \<open>induction\<close> will induct on the leftmost
 one.
 
 As a bonus, we also prove the remaining direction of the equivalence of
 \<^const>\<open>ev\<close> and \<^const>\<open>evn\<close>:
 \<close>
 
 lemma "evn n \<Longrightarrow> ev n"
 apply(induction n rule: evn.induct)
 
 txt\<open>This is a proof by computation induction on \<open>n\<close> (see
 \autoref{sec:recursive-funs}) that sets up three subgoals corresponding to
 the three equations for \<^const>\<open>evn\<close>:
 @{subgoals[display,indent=0]}
 The first and third subgoals follow with @{thm[source]ev0} and @{thm[source]evSS}, and the second subgoal is trivially true because \<^prop>\<open>evn(Suc 0)\<close> is \<^const>\<open>False\<close>:
 \<close>
 
 by (simp_all add: ev0 evSS)
 
 text\<open>The rules for \<^const>\<open>ev\<close> make perfect simplification and introduction
 rules because their premises are always smaller than the conclusion. It
 makes sense to turn them into simplification and introduction rules
 permanently, to enhance proof automation. They are named @{thm[source] ev.intros}
 \index{intros@\<open>.intros\<close>} by Isabelle:\<close>
 
 declare ev.intros[simp,intro]
 
 text\<open>The rules of an inductive definition are not simplification rules by
 default because, in contrast to recursive functions, there is no termination
 requirement for inductive definitions.
 
 \subsubsection{Inductive Versus Recursive}
 
 We have seen two definitions of the notion of evenness, an inductive and a
 recursive one. Which one is better? Much of the time, the recursive one is
 more convenient: it allows us to do rewriting in the middle of terms, and it
 expresses both the positive information (which numbers are even) and the
 negative information (which numbers are not even) directly. An inductive
 definition only expresses the positive information directly. The negative
 information, for example, that \<open>1\<close> is not even, has to be proved from
 it (by induction or rule inversion). On the other hand, rule induction is
 tailor-made for proving \mbox{\<^prop>\<open>ev n \<Longrightarrow> P n\<close>} because it only asks you
 to prove the positive cases. In the proof of \<^prop>\<open>evn n \<Longrightarrow> P n\<close> by
 computation induction via @{thm[source]evn.induct}, we are also presented
 with the trivial negative cases. If you want the convenience of both
 rewriting and rule induction, you can make two definitions and show their
 equivalence (as above) or make one definition and prove additional properties
 from it, for example rule induction from computation induction.
 
 But many concepts do not admit a recursive definition at all because there is
 no datatype for the recursion (for example, the transitive closure of a
 relation), or the recursion would not terminate (for example,
 an interpreter for a programming language). Even if there is a recursive
 definition, if we are only interested in the positive information, the
 inductive definition may be much simpler.
 
 \subsection{The Reflexive Transitive Closure}
 \label{sec:star}
 
 Evenness is really more conveniently expressed recursively than inductively.
 As a second and very typical example of an inductive definition we define the
 reflexive transitive closure.
 \ifsem
 It will also be an important building block for
 some of the semantics considered in the second part of the book.
 \fi
 
 The reflexive transitive closure, called \<open>star\<close> below, is a function
 that maps a binary predicate to another binary predicate: if \<open>r\<close> is of
 type \<open>\<tau> \<Rightarrow> \<tau> \<Rightarrow> bool\<close> then \<^term>\<open>star r\<close> is again of type \<open>\<tau> \<Rightarrow>
 \<tau> \<Rightarrow> bool\<close>, and \<^prop>\<open>star r x y\<close> means that \<open>x\<close> and \<open>y\<close> are in
 the relation \<^term>\<open>star r\<close>. Think \<^term>\<open>r\<^sup>*\<close> when you see \<^term>\<open>star
 r\<close>, because \<open>star r\<close> is meant to be the reflexive transitive closure.
 That is, \<^prop>\<open>star r x y\<close> is meant to be true if from \<open>x\<close> we can
 reach \<open>y\<close> in finitely many \<open>r\<close> steps. This concept is naturally
 defined inductively:\<close>
 
 inductive star :: "('a \<Rightarrow> 'a \<Rightarrow> bool) \<Rightarrow> 'a \<Rightarrow> 'a \<Rightarrow> bool"  for r where
 refl:  "star r x x" |
 step:  "r x y \<Longrightarrow> star r y z \<Longrightarrow> star r x z"
 
 text\<open>The base case @{thm[source] refl} is reflexivity: \<^term>\<open>x=y\<close>. The
 step case @{thm[source]step} combines an \<open>r\<close> step (from \<open>x\<close> to
 \<open>y\<close>) and a \<^term>\<open>star r\<close> step (from \<open>y\<close> to \<open>z\<close>) into a
 \<^term>\<open>star r\<close> step (from \<open>x\<close> to \<open>z\<close>).
 The ``\isacom{for}~\<open>r\<close>'' in the header is merely a hint to Isabelle
 that \<open>r\<close> is a fixed parameter of \<^const>\<open>star\<close>, in contrast to the
 further parameters of \<^const>\<open>star\<close>, which change. As a result, Isabelle
 generates a simpler induction rule.
 
 By definition \<^term>\<open>star r\<close> is reflexive. It is also transitive, but we
 need rule induction to prove that:\<close>
 
 lemma star_trans: "star r x y \<Longrightarrow> star r y z \<Longrightarrow> star r x z"
 apply(induction rule: star.induct)
 (*<*)
 defer
 apply(rename_tac u x y)
 defer
 (*>*)
 txt\<open>The induction is over \<^prop>\<open>star r x y\<close> (the first matching assumption)
 and we try to prove \mbox{\<^prop>\<open>star r y z \<Longrightarrow> star r x z\<close>},
 which we abbreviate by \<^prop>\<open>P x y\<close>. These are our two subgoals:
 @{subgoals[display,indent=0]}
 The first one is \<^prop>\<open>P x x\<close>, the result of case @{thm[source]refl},
 and it is trivial:\index{assumption@\<open>assumption\<close>}
 \<close>
 apply(assumption)
 txt\<open>Let us examine subgoal \<open>2\<close>, case @{thm[source] step}.
 Assumptions \<^prop>\<open>r u x\<close> and \mbox{\<^prop>\<open>star r x y\<close>}
 are the premises of rule @{thm[source]step}.
 Assumption \<^prop>\<open>star r y z \<Longrightarrow> star r x z\<close> is \mbox{\<^prop>\<open>P x y\<close>},
 the IH coming from \<^prop>\<open>star r x y\<close>. We have to prove \<^prop>\<open>P u y\<close>,
 which we do by assuming \<^prop>\<open>star r y z\<close> and proving \<^prop>\<open>star r u z\<close>.
 The proof itself is straightforward: from \mbox{\<^prop>\<open>star r y z\<close>} the IH
 leads to \<^prop>\<open>star r x z\<close> which, together with \<^prop>\<open>r u x\<close>,
 leads to \mbox{\<^prop>\<open>star r u z\<close>} via rule @{thm[source]step}:
 \<close>
 apply(metis step)
 done
 
 text\<open>\index{rule induction|)}
 
 \subsection{The General Case}
 
 Inductive definitions have approximately the following general form:
 \begin{quote}
 \isacom{inductive} \<open>I :: "\<tau> \<Rightarrow> bool"\<close> \isacom{where}
 \end{quote}
 followed by a sequence of (possibly named) rules of the form
 \begin{quote}
 \<open>\<lbrakk> I a\<^sub>1; \<dots>; I a\<^sub>n \<rbrakk> \<Longrightarrow> I a\<close>
 \end{quote}
 separated by \<open>|\<close>. As usual, \<open>n\<close> can be 0.
 The corresponding rule induction principle
 \<open>I.induct\<close> applies to propositions of the form
 \begin{quote}
 \<^prop>\<open>I x \<Longrightarrow> P x\<close>
 \end{quote}
 where \<open>P\<close> may itself be a chain of implications.
 \begin{warn}
 Rule induction is always on the leftmost premise of the goal.
 Hence \<open>I x\<close> must be the first premise.
 \end{warn}
 Proving \<^prop>\<open>I x \<Longrightarrow> P x\<close> by rule induction means proving
 for every rule of \<open>I\<close> that \<open>P\<close> is invariant:
 \begin{quote}
 \<open>\<lbrakk> I a\<^sub>1; P a\<^sub>1; \<dots>; I a\<^sub>n; P a\<^sub>n \<rbrakk> \<Longrightarrow> P a\<close>
 \end{quote}
 
 The above format for inductive definitions is simplified in a number of
 respects. \<open>I\<close> can have any number of arguments and each rule can have
 additional premises not involving \<open>I\<close>, so-called \conceptidx{side
 conditions}{side condition}. In rule inductions, these side conditions appear as additional
 assumptions. The \isacom{for} clause seen in the definition of the reflexive
 transitive closure simplifies the induction rule.
 \index{inductive definition|)}
 
 \subsection*{Exercises}
 
 \begin{exercise}
 Formalize the following definition of palindromes
 \begin{itemize}
 \item The empty list and a singleton list are palindromes.
 \item If \<open>xs\<close> is a palindrome, so is \<^term>\<open>a # xs @ [a]\<close>.
 \end{itemize}
 as an inductive predicate \<open>palindrome ::\<close> \<^typ>\<open>'a list \<Rightarrow> bool\<close>
 and prove that \<^prop>\<open>rev xs = xs\<close> if \<open>xs\<close> is a palindrome.
 \end{exercise}
 
 \exercise
 We could also have defined \<^const>\<open>star\<close> as follows:
 \<close>
 
 inductive star' :: "('a \<Rightarrow> 'a \<Rightarrow> bool) \<Rightarrow> 'a \<Rightarrow> 'a \<Rightarrow> bool" for r where
 refl': "star' r x x" |
 step': "star' r x y \<Longrightarrow> r y z \<Longrightarrow> star' r x z"
 
 text\<open>
 The single \<open>r\<close> step is performed after rather than before the \<open>star'\<close>
 steps. Prove \<^prop>\<open>star' r x y \<Longrightarrow> star r x y\<close> and
 \<^prop>\<open>star r x y \<Longrightarrow> star' r x y\<close>. You may need lemmas.
 Note that rule induction fails
 if the assumption about the inductive predicate is not the first assumption.
 \endexercise
 
 \begin{exercise}\label{exe:iter}
 Analogous to \<^const>\<open>star\<close>, give an inductive definition of the \<open>n\<close>-fold iteration
 of a relation \<open>r\<close>: \<^term>\<open>iter r n x y\<close> should hold if there are \<open>x\<^sub>0\<close>, \dots, \<open>x\<^sub>n\<close>
 such that \<^prop>\<open>x = x\<^sub>0\<close>, \<^prop>\<open>x\<^sub>n = y\<close> and \<open>r x\<^bsub>i\<^esub> x\<^bsub>i+1\<^esub>\<close> for
 all \<^prop>\<open>i < n\<close>. Correct and prove the following claim:
 \<^prop>\<open>star r x y \<Longrightarrow> iter r n x y\<close>.
 \end{exercise}
 
 \begin{exercise}\label{exe:cfg}
 A context-free grammar can be seen as an inductive definition where each
 nonterminal $A$ is an inductively defined predicate on lists of terminal
 symbols: $A(w)$ means that $w$ is in the language generated by $A$.
 For example, the production $S \to a S b$ can be viewed as the implication
 \<^prop>\<open>S w \<Longrightarrow> S (a # w @ [b])\<close> where \<open>a\<close> and \<open>b\<close> are terminal symbols,
 i.e., elements of some alphabet. The alphabet can be defined like this:
 \isacom{datatype} \<open>alpha = a | b | \<dots>\<close>
 
 Define the two grammars (where $\varepsilon$ is the empty word)
 \[
 \begin{array}{r@ {\quad}c@ {\quad}l}
 S &\to& \varepsilon \quad\mid\quad aSb \quad\mid\quad SS \\
 T &\to& \varepsilon \quad\mid\quad TaTb
 \end{array}
 \]
 as two inductive predicates.
 If you think of \<open>a\<close> and \<open>b\<close> as ``\<open>(\<close>'' and  ``\<open>)\<close>'',
 the grammar defines strings of balanced parentheses.
 Prove \<^prop>\<open>T w \<Longrightarrow> S w\<close> and \mbox{\<^prop>\<open>S w \<Longrightarrow> T w\<close>} separately and conclude
 \<^prop>\<open>S w = T w\<close>.
 \end{exercise}
 
 \ifsem
 \begin{exercise}
 In \autoref{sec:AExp} we defined a recursive evaluation function
 \<open>aval :: aexp \<Rightarrow> state \<Rightarrow> val\<close>.
 Define an inductive evaluation predicate
 \<open>aval_rel :: aexp \<Rightarrow> state \<Rightarrow> val \<Rightarrow> bool\<close>
 and prove that it agrees with the recursive function:
 \<^prop>\<open>aval_rel a s v \<Longrightarrow> aval a s = v\<close>, 
 \<^prop>\<open>aval a s = v \<Longrightarrow> aval_rel a s v\<close> and thus
 \noquotes{@{prop [source] "aval_rel a s v \<longleftrightarrow> aval a s = v"}}.
 \end{exercise}
 
 \begin{exercise}
 Consider the stack machine from Chapter~3
 and recall the concept of \concept{stack underflow}
 from Exercise~\ref{exe:stack-underflow}.
 Define an inductive predicate
 \<open>ok :: nat \<Rightarrow> instr list \<Rightarrow> nat \<Rightarrow> bool\<close>
 such that \<open>ok n is n'\<close> means that with any initial stack of length
 \<open>n\<close> the instructions \<open>is\<close> can be executed
 without stack underflow and that the final stack has length \<open>n'\<close>.
 Prove that \<open>ok\<close> correctly computes the final stack size
 @{prop[display] "\<lbrakk>ok n is n'; length stk = n\<rbrakk> \<Longrightarrow> length (exec is s stk) = n'"}
 and that instruction sequences generated by \<open>comp\<close>
 cannot cause stack underflow: \ \<open>ok n (comp a) ?\<close> \ for
 some suitable value of \<open>?\<close>.
 \end{exercise}
 \fi
 \<close>
 (*<*)
 end
 (*>*)
diff --git a/src/Pure/Thy/latex.ML b/src/Pure/Thy/latex.ML
--- a/src/Pure/Thy/latex.ML
+++ b/src/Pure/Thy/latex.ML
@@ -1,267 +1,268 @@
 (*  Title:      Pure/Thy/latex.ML
     Author:     Markus Wenzel, TU Muenchen
 
 LaTeX presentation elements -- based on outer lexical syntax.
 *)
 
 signature LATEX =
 sig
   type text
   val string: string -> text
   val text: string * Position.T -> text
   val block: text list -> text
   val enclose_body: string -> string -> text list -> text list
   val enclose_block: string -> string -> text list -> text
   val output_text: text list -> string
   val output_positions: Position.T -> text list -> string
   val output_name: string -> string
   val output_ascii: string -> string
   val output_ascii_breakable: string -> string -> string
   val output_symbols: Symbol.symbol list -> string
   val output_syms: string -> string
   val symbols: Symbol_Pos.T list -> text
   val symbols_output: Symbol_Pos.T list -> text
   val begin_delim: string -> string
   val end_delim: string -> string
   val begin_tag: string -> string
   val end_tag: string -> string
   val environment_block: string -> text list -> text
   val environment: string -> string -> string
   val isabelle_body: string -> text list -> text list
   val theory_entry: string -> string
   val latexN: string
   val latex_output: string -> string * int
   val latex_markup: string * Properties.T -> Markup.output
   val latex_indent: string -> int -> string
 end;
 
 structure Latex: LATEX =
 struct
 
 (* text with positions *)
 
 abstype text = Text of string * Position.T | Block of text list
 with
 
 fun string s = Text (s, Position.none);
 val text = Text;
 val block = Block;
 
 fun output_text texts =
   let
     fun output (Text (s, _)) = Buffer.add s
       | output (Block body) = fold output body;
   in Buffer.empty |> fold output texts |> Buffer.content end;
 
 fun output_positions file_pos texts =
   let
     fun position (a, b) = enclose "%:%" "%:%" (a ^ "=" ^ b);
     fun add_position p positions =
       let val s = position (apply2 Value.print_int p)
       in positions |> s <> hd positions ? cons s end;
 
     fun output (Text (s, pos)) (positions, line) =
           let
             val positions' =
               (case Position.line_of pos of
                 NONE => positions
               | SOME l => add_position (line, l) positions);
             val line' = fold_string (fn c => fn n => if c = "\n" then n + 1 else n) s line;
           in (positions', line') end
       | output (Block body) res = fold output body res;
   in
     (case Position.file_of file_pos of
       NONE => ""
     | SOME file =>
         ([position (Markup.fileN, file), "\\endinput"], 1)
         |> fold output texts |> #1 |> rev |> cat_lines)
   end;
 
 end;
 
 fun enclose_body bg en body =
   (if bg = "" then [] else [string bg]) @ body @
   (if en = "" then [] else [string en]);
 
 fun enclose_block bg en = block o enclose_body bg en;
 
 
 (* output name for LaTeX macros *)
 
 val output_name =
   translate_string
     (fn "_" => "UNDERSCORE"
       | "'" => "PRIME"
       | "0" => "ZERO"
       | "1" => "ONE"
       | "2" => "TWO"
       | "3" => "THREE"
       | "4" => "FOUR"
       | "5" => "FIVE"
       | "6" => "SIX"
       | "7" => "SEVEN"
       | "8" => "EIGHT"
       | "9" => "NINE"
       | s => s);
 
 fun enclose_name bg en = enclose bg en o output_name;
 
 
 (* output verbatim ASCII *)
 
 val output_ascii =
   translate_string
     (fn " " => "\\ "
       | "\t" => "\\ "
       | "\n" => "\\isanewline\n"
       | s =>
-          if exists_string (fn s' => s = s') "\"#$%&',-<>\\^_`{}~"
-          then enclose "{\\char`\\" "}" s else s);
+          s
+          |> exists_string (fn s' => s = s') "\"#$%&',-<>\\^_`{}~" ? enclose "{\\char`\\" "}"
+          |> suffix "{\\kern0pt}");
 
 fun output_ascii_breakable sep =
   space_explode sep
   #> map output_ascii
   #> space_implode (output_ascii sep ^ "\\discretionary{}{}{}");
 
 
 (* output symbols *)
 
 local
 
 val char_table =
   Symtab.make
    [("\007", "{\\isacharbell}"),
     ("!", "{\\isacharbang}"),
     ("\"", "{\\isachardoublequote}"),
     ("#", "{\\isacharhash}"),
     ("$", "{\\isachardollar}"),
     ("%", "{\\isacharpercent}"),
     ("&", "{\\isacharampersand}"),
     ("'", "{\\isacharprime}"),
     ("(", "{\\isacharparenleft}"),
     (")", "{\\isacharparenright}"),
     ("*", "{\\isacharasterisk}"),
     ("+", "{\\isacharplus}"),
     (",", "{\\isacharcomma}"),
     ("-", "{\\isacharminus}"),
     (".", "{\\isachardot}"),
     ("/", "{\\isacharslash}"),
     (":", "{\\isacharcolon}"),
     (";", "{\\isacharsemicolon}"),
     ("<", "{\\isacharless}"),
     ("=", "{\\isacharequal}"),
     (">", "{\\isachargreater}"),
     ("?", "{\\isacharquery}"),
     ("@", "{\\isacharat}"),
     ("[", "{\\isacharbrackleft}"),
     ("\\", "{\\isacharbackslash}"),
     ("]", "{\\isacharbrackright}"),
     ("^", "{\\isacharcircum}"),
     ("_", "{\\isacharunderscore}"),
     ("`", "{\\isacharbackquote}"),
     ("{", "{\\isacharbraceleft}"),
     ("|", "{\\isacharbar}"),
     ("}", "{\\isacharbraceright}"),
     ("~", "{\\isachartilde}")];
 
 fun output_chr " " = "\\ "
   | output_chr "\t" = "\\ "
   | output_chr "\n" = "\\isanewline\n"
   | output_chr c =
       (case Symtab.lookup char_table c of
-        SOME s => s
+        SOME s => s ^ "{\\kern0pt}"
       | NONE => if Symbol.is_ascii_digit c then enclose "{\\isadigit{" "}}" c else c);
 
 fun output_sym sym =
   (case Symbol.decode sym of
     Symbol.Char s => output_chr s
   | Symbol.UTF8 s => s
   | Symbol.Sym s => enclose_name "{\\isasym" "}" s
   | Symbol.Control s => enclose_name "\\isactrl" " " s
   | Symbol.Malformed s => error (Symbol.malformed_msg s)
   | Symbol.EOF => error "Bad EOF symbol");
 
 open Basic_Symbol_Pos;
 
 val scan_latex_length =
   Scan.many1 (fn (s, _) => s <> Symbol.latex andalso Symbol.not_eof s)
     >> (Symbol.length o map Symbol_Pos.symbol) ||
   $$ Symbol.latex -- Scan.option (Scan.permissive Symbol_Pos.scan_cartouche "") >> K 0;
 
 val scan_latex =
   $$ Symbol.latex |-- Symbol_Pos.scan_cartouche_content "Embedded LaTeX: "
     >> (implode o map Symbol_Pos.symbol) ||
   Scan.one (Symbol.not_eof o Symbol_Pos.symbol) >> (output_sym o Symbol_Pos.symbol);
 
 fun read scan syms =
   Scan.read Symbol_Pos.stopper (Scan.repeat scan) (map (rpair Position.none) syms);
 
 in
 
 fun length_symbols syms =
   fold Integer.add (these (read scan_latex_length syms)) 0;
 
 fun output_symbols syms =
   if member (op =) syms Symbol.latex then
     (case read scan_latex syms of
       SOME ss => implode ss
     | NONE => error ("Malformed embedded LaTeX: " ^ quote (Symbol.beginning 10 syms)))
   else implode (map output_sym syms);
 
 val output_syms = output_symbols o Symbol.explode;
 
 end;
 
 fun symbols syms = text (Symbol_Pos.content syms, #1 (Symbol_Pos.range syms));
 fun symbols_output syms =
   text (output_symbols (map Symbol_Pos.symbol syms), #1 (Symbol_Pos.range syms));
 
 
 (* tags *)
 
 val begin_delim = enclose_name "%\n\\isadelim" "\n";
 val end_delim = enclose_name "%\n\\endisadelim" "\n";
 val begin_tag = enclose_name "%\n\\isatag" "\n";
 fun end_tag tg = enclose_name "%\n\\endisatag" "\n" tg ^ enclose "{\\isafold" "}%\n" tg;
 
 
 (* theory presentation *)
 
 fun environment_delim name =
  ("%\n\\begin{" ^ output_name name ^ "}%\n",
   "%\n\\end{" ^ output_name name ^ "}");
 
 fun environment_block name = environment_delim name |-> enclose_body #> block;
 fun environment name = environment_delim name |-> enclose;
 
 fun isabelle_body name =
   enclose_body
    ("%\n\\begin{isabellebody}%\n\\setisabellecontext{" ^ output_syms name ^ "}%\n")
    "%\n\\end{isabellebody}%\n";
 
 fun theory_entry name = "\\input{" ^ name ^ ".tex}\n\n";
 
 
 (* print mode *)
 
 val latexN = "latex";
 
 fun latex_output str =
   let val syms = Symbol.explode str
   in (output_symbols syms, length_symbols syms) end;
 
 fun latex_markup (s, _: Properties.T) =
   if s = Markup.commandN orelse s = Markup.keyword1N orelse s = Markup.keyword3N
   then ("\\isacommand{", "}")
   else if s = Markup.keyword2N
   then ("\\isakeyword{", "}")
   else Markup.no_output;
 
 fun latex_indent "" _ = ""
   | latex_indent s _ = enclose "\\isaindent{" "}" s;
 
 val _ = Output.add_mode latexN latex_output (prefix Symbol.latex o cartouche);
 val _ = Markup.add_mode latexN latex_markup;
 val _ = Pretty.add_mode latexN latex_indent;
 
 end;